Pump started leaking, lost about 30 gallons of oil. There were 4 screws loose. Tightened it up, checked operation, O.k. to run.
Sean 9/11/09
Saturday, September 12, 2009
Sprue Pickers
Printed off the manuals for the yushin pickers, I am finding a few problems as I go through them but picking out the best.
Collin and I put one on press#17 and Press#14 Friday night.
Press# 16 is next for a 550. Then I was going to put 900's on 18,19, and 20.
Ronnie said that press22 was going to move soon so we will hold off until then. (With a 750).
Building adapter plates as we go for now since each machine must be uniquely fit and are drilled different.
The interface schematics are on the table in the shop next to the good 120vac interface box.
Josh is supposed to be getting more in soon.
Sean 9/11/09
Collin and I put one on press#17 and Press#14 Friday night.
Press# 16 is next for a 550. Then I was going to put 900's on 18,19, and 20.
Ronnie said that press22 was going to move soon so we will hold off until then. (With a 750).
Building adapter plates as we go for now since each machine must be uniquely fit and are drilled different.
The interface schematics are on the table in the shop next to the good 120vac interface box.
Josh is supposed to be getting more in soon.
Sean 9/11/09
Subscribe to:
Posts (Atom)