Mp#15- Motor coupling had a catastrphic failure and will need replaced. I removed the coupling and inspected the motor shaft and the pump shaft. Both are in good shape, pump is not locked up and moves freely. It simply appears that the coupling has worn out over time. It is laying in the shop on next to the vise. We need to order one when you read this Josh, Mark or Ronnie. They are running part number 09-79048-03 (Fascia w/ pad print) and the mold is closed up. I advised Roger that the clamp could be opened with a portapower if he needed to pull out the tool to run else where, but he said it was not necessary. I looked it MRO and did not locate another Coupling.
Have a happy new year. Keep it between the lines!
Sean
Saturday, December 31, 2011
Wednesday, December 28, 2011
12.27.11 D-shift Sean
Dryer DR-10 on the mezzanine had low regen temp alarm. Found bad heaters and replaced them.
Mp#-24 had a leaking hydraulic hose on the core line fitting. Tightened it up, stopped the leak.
The Fan housing press with fan seal verification is ready to be cheked out and make the final adjustments to it. It should be ready to use on Friday.
Give me a call if there are any questions, Thanks.
Sean
Mp#-24 had a leaking hydraulic hose on the core line fitting. Tightened it up, stopped the leak.
The Fan housing press with fan seal verification is ready to be cheked out and make the final adjustments to it. It should be ready to use on Friday.
Give me a call if there are any questions, Thanks.
Sean
Subscribe to:
Posts (Atom)