Oreck Molding Support Maintenance Log: 11/1/09

Saturday, November 7, 2009

Replaced lightbulbs in Wittman pendant ; waiting for e-stop & encoder.

Took empty oil tank to bone yard – needs to be returned to supplier.

Brought empty waste oil drums on spill pllet back inside.

Mp-10 connector assembly welder quit working ; had to realign & tighten booster & horn assembly.

Transformers for Stars

Installed the robot trans. in #20 and checked voltage at receptacle. O.k. all it needs at this point is tieing in the machine interlocks with relays. Which I will cover with Josh soon.

Installed the robot transformer in #24 but did not attach primary power because Marty did not want the press to go down at all (too hot) same with #6.

Installed dummy plugs on #22 robot and #20 robot. Still need to do #6.

I was not sure about the pendant for #22 robot, it was left apart and I am guessing we are waiting on the E-stop switch?

Be back on it again this evening.

Friday, November 6, 2009

11.6.09

RONNIE AND I PUT BARREL AND SCREW FOR MP5 ON SKIDS AND SENT TO SHIPPING FOR DELIVERY MONDAY, 11/9 5AM

TRANSFORMERS FOR ROBOT POWER ON MP24, MP20, AND MP6(IF IT NEED A TRANS) ARE ON MAINT TABLE IN SHOP. FUSE BLOCKS AND FUSES ARE ALSO ON TABLE.

REPLACEMENT LAMPS ARE ON MAINT TABLE FOR WITTMANN ROBOT PENDANT.

NO SIGN OF SPARE PARTS FOR WITTMAN.

HAVE A GREAT WEEKEND!!!!!!!!!!!

Mark McKee

Technical Specialist

Oreck Manufacturing Company

1400 Salem Rd

Cookeville, TN 38506

mmckee@oreck.com

PH 931.646.7856

CELL 931.644.5289

FAX 931.646.7851

Wednesday, November 4, 2009

11.4.2009

Pulled screw out of MP5 this morning. Screw has chunks of metal missing.

Sent MP5’s CPU and FHD boards to R and R Electronics for evaluation.

Ordered replacement lamps for Wittmann robot pendant for tomorrow. Josh says we should receive other spares for Wittmann tomorrow as well.

Looked at swapping Y encoder with X. Y cable too short to swap with any other axis.

Ordered additional heater connectors, boxes, and cables for incoming molds.

The push to disconnect fittings for the Star Robot cylinders are here and can be installed.

I worked on installing a shelf under the new multi-fan housing tester to store addition weld nest for MP12.