Mp#15- Replaced nozzle heater band at Roy Smith's request.
Replaced bad contactor on the thermolator that was in the shop. Green tagged it and placed back in the auxilliary equipment area.
Made a fixture for the intake pivot to be drilled out at the mounting tab. The hole was flashed in and several had to be reworked, at Marty's request.
Repaired the web-trak sensor cable on the compact cannister hotstamp press. The cable had rubbed into the heater plate melting through it.
Soldered and tied it back up neatly.
The dryer in the shop needs the process blower changed out. I didn't see one in MRO so I plan to take the one from the dryer on the trailer out back to repair it. Also changed out the bad contactor in it.
Call if there are any questions.
Sean
No comments:
Post a Comment