Before I left I programmed the Wittman for the Hoky “Top Cover” (80083) that they hung in MP22 today. There was not a set up in the Nissei, so the only thing that cannot be changed on the machine is the clamp full open position and the eject forward position. The only thing on the Wittman that needs to be changed is the cup position on the EOAT. Also, the way the teach program is written right now, you have to time your eject speed so that the ejectors get all the way out just before the robot gets to the mold face (When robot is at full speed. First cycle, the robot will only run 30% speed. To change, in Auto, from the main Wittman screen, hit F6 to increase overall speed and F1 to decrease). First cycle the eject speed needs to be ran REAL slow so that the robot can get there before the part falls off, and as you increase the robot overall speed, you need to increase the eject forward speed.
Thanks
Joshua Ledbetter
Manufacturing Engineer
Oreck Manufacturing Company
931-239-3235
No comments:
Post a Comment