" C " Shift

   MP-11    Core set not reading;   The wires had pulled out of the plug. Repaired.

 

  MP- 5   Getting “ prefill time out alarm “.      Changed offset.

 

   Got filter unit off trailer , cleaned, &  mounted on cart. Need to check on filters.

 

I  made some measurements on the main frame mold & MP – 2 . I measured  from the center of the sprue bushing  to the top of the mold.  While the mold was out of MP-2 , I was able to measure from the center of the platen . I marked the uprights . The marks are  one inch above the highest point on the

       mold .  We will need at least 10 inches between the uprights for clearance.

 

 

 

     R.Upchurch

     Molding Maint.