Mp#13-Redid the heater bands on the nozzle. Checked and found that screw tip was indeed broken. Mitch was running it but they were scrapping too many so they eventually shut it down.
Repaired the cannister gate cutter fixture. Tested it out and it works great.
The drill press in the rework area broke the quill return spring. I was able to heat and rebend it and it is working again for now but we need to order another one. I gave Mark a lead with the drill press info.
Cleaned up oil around #17 and #21. Put some new oil absorbent down.
I am sending Jerome an email to see if he will leave #5 down on Saturday nite to do the screw tip change and barrel measurements.
Call if there are any questions.
Sean
No comments:
Post a Comment