Made program changes to the PLC and Quickpanel on MP5 Robot for an I/O Monitoring Screen. The new screen can be accessed from the main menu. Please try to check it out and use it as much as possible, we need to see if everything works correctly and if we want any more changes. If you have any questions or suggestions please let me know.
Picked up an inline, directional control valve for the eject retract on MP16 to slow down breakage of butterfly bolts. Ronnie installed and set it to smooth out the banging on the retract.
We received the replacement seals for the Novatec Proportional Valves. They are in MRO.
Small ice cube relays were ordered for the AEC Robot control cabinets, RB, RYS, and RZS.
The new butterfly plate, guide rod, and knockout rods for MP20 were finished and
Helped Mitch set the welder outputs in MP12.
Tightened and realigned clamp cylinder on MP10 connector welder.
Ordered the steel for Robot Riser spacers. Josh got the prints for the machine mounts. The steel should be here this Saturday. We can start making them next week.
Started working on In Mold Labeling Project
Changed out more of the 3 pin color pumps connectors to 2 pin.
Technical Specialist
Oreck Manufacturing Company
mmckee@oreck.com
PH 931.646.7856
CELL 931.644.5289
FAX 931.646.7615
No comments:
Post a Comment